8
Neck Loop receiver
9 - Rechargeable Battery
10 - Loop Safety break
11 - Volume Control
12 - Auxiliary Jack Socket
Switch on the receiver with the switch on the
back of the receiver. Place the neck loop
around your neck with the switch side
towards
you.
The neck loop has a safety break in it; this
should be connected together when in use.
You can use this feature to make wearing or
taking off the receiver easier.
Switch your hearing aid to the ‘T’ position. Adjust the volume control on the
receiver to suit your hearing; you may also need to alter the volume of your
hearing aid.
When finished listening; switch off the receiver on the back of the receiver and
place the receiver in the charging cradle.
The neck loop receiver can also be used as a universal receiver by using the
3.5mm stereo jack socket on the base of the receiver. Any suitable listening
device with a 3.5mm stereo plug may be used. E.g.
- Headphones
-
Under chin headset
-
Earphones
-
Neck Loop
-
Ear Hooks – mono or stereo
-
Hearing aid direct input leads
Plugging in a listening device will cut off the integral neck loop. Removing the
external listening device will return signal to the integral neck loop.
