7
XP68-03-LX45 v1.0
5.
Configuration Device Programming
An mcs file is required to download an FPGA configuration data to the
configuration device via JTAG. To generate an mcs file using iMPACT, please refer
to the following steps.
5.1.
Generating mcs file
Start iMPACT, and double-click [Create PROM File] and set items as shown
below.
Storage Target : SPI Flash – Configure Single FPGA
Storage Device : 16M (set one device)
File Format
: MCS
Others
: any
Select your bit file, and generate MCS file.
5.2.
Programming Configuration Device
Assign the mcs file to a Flash icon and choose [SPI PROM – M25P16] for device
type, then right click and select a command.
Please set FPGA configuration mode to [Master Serial/SPI] mode.
