Humandata LNX-003, Руководство пользователя

Страница: 23 / 34

19
LNX-003(Ver.1.0)
[Extension Setting]
Item Contents
Pack control
Enable/Disable
Select to enable pack control.
Two firmware-selectable packing algorithms define how and when
packets are sent to the network.The standard algorithm is optimized
for applications in which the unit is used in a local environment,
allowing for very small delays for single characters, while keeping
the packet count low. The alternate packing algorithm minimizes the
packet count on the network and is especially useful in applications
in a routed Wide Area Network (WAN). Adjusting parameters in this
mode can economize the network data stream.
The default setting is disable.
Idle gap time
Select idle gap time from 12, 52, 250 or 5000 msec.
After this idle gap time with no response from a serial device, data is
packetized and transmitted to the target. The default setting is 12.
Trigger character Select packet size and set trigger character (hexadecimal digits).
Check sum Select check sum size.