Humandata LNX-003, Руководство пользователя

Страница: 22 / 34

18
LNX-003(Ver.1.0)
Item Contents
Protocol
From the drop-down menu, select TCP or UDP.
Normally TCP is used, but when one-to-multiple communication
like broadcast or sensitive-responsiveness is needed, please select
UDP. The default setting is TCP.
Remote Setting
(Tunneling mode)
Enable/Disable
Select to enable remote connection (tunneling).
The default setting is disable.
Remote IP address Enter the remote IP address for tunneling target.
Remote Port number Enter the remote port number for tunneling target.
Connection method Select connection method to the target.
Baudrate
LNX-003 and attached serial device must agree on a speed or
baud rate to use for the serial connection.Valid baud rates are
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 or
230400. The default setting is 9600.
Flow control Not used.
Stop bits Select from 1 or 2 bit. The default setting is 1.
Parity Select from Even, Odd or None. The default setting is none.
Data bits Select from 7 or 8 bit. The default setting is 8.
RS485/422 (4-wire)
RS485 (2-wire) Select communication protocol.Please set to the same protocol as
setting that configured by SW2.