humantouch.com
10
11
Now choose a massage mode.
Your Human Touch massage chair lets you customize
your massage using a wide variety of massage techniques. Choose from four stationary
massage modes and a rolling massage, or combine them. Use the Range button to tailor
your vertical massage range, or the Zone and Position buttons to target your massage to
a specific area (see opposite page). Or, let the chair take control – just select one of the
three auto programs, which alternate massage modes and target different areas of your
back. No matter how you use it, Robotic Massage Technology
™
offers maximum massage
flexibility and refreshing benefits.
take
control
Width
— Focus or diffuse massage
pressure by selecting the wide, standard,
or narrow massage width setting.
Select the width setting
after
selecting
percussion or rolling massage modes.
Power
—
Lights to indicate that
master power switch is on.
Power Recline
— Adjusts the
backrest angle.
Zone
— Targets your massage to a six-inch
zone. Use the Position buttons to focus
your massage on the desired area.
Manual Massage Techniques
— Four
manual massage techniques let you
customise your massage. Each massage
technique button toggles among auto
(alternates speeds), high and low speeds.
Stop
— Stops the massage and parks
the massage rollers at the top of the
backrest.
Foot and Calf Massage
— Toggles
among auto (alternates speeds),
high and low speeds.
Stretch
— Press the Stretch button for up
to 15 seconds to activate (the remote beeps
twice when ready). The chair performs a
gentle full-body stretch.
Session Timer
— Counts down the time
remaining in the currently selected 15-
minute Auto Massage Programme. The
Session Timer does not start again at 15
minutes when you change massage modes.
15 minutes is the recommended maximum
massage duration
.
Legs up
— Raises the foot and calf
massager to a horizontal position.
Legs down
— lowers the foot and calf
massager to a vertical position.
Backrest up
— Reclines the backrest
to a horizontal position.
Backrest down
— Raises the backrest
to a vertical position.
Position Controller
To select a position setting, use your
thumb to push the controller in the
direction of the desired setting.
FRONT
Massage Programs massage the
specified area of your back for 15
minutes, using a variety of massage
techniques. The corresponding LED
lights on the remote to indicate which
massage mode is currently in use.
Upper
– massages your entire back
Full
– massages just your upper back
Lower
– massages just your lower back
Range
— Press to select tall, medium,
or short, based on your height, to position
the massage rollers for maximum comfort.
SIDE
