7.Temperature / humidity mode
It displays the temperature and humidity in one screen
**** In case of temperature and humidity, the temperature/humidity sensor is located
in the housing and can give a possible deviation of 5 to 10%.
4 Battery Status : This icon shows the remaining charge of the battery
Specifications
Disclaimer
This device can be used to measure air quality in real-time portable. The OLED display has a good brightness,
but can show traces of burn-in after continuous use. It is recommended not to leave the appliance on continuously
unless absolutely necessary.
Do not expose the device to direct sunlight or excessive humidity for a long period of time.
Do not expose the device to a very dusty environment for a long period of time.
Do not disassemble the device.
Do not allow water or liquids to enter the device. This may result in a malfunction.
The device may display erroneous readings depending on the environment, misuse, wind or external factors
The measured values are purely indicative and for personal use. The manufacturer or dealer assumes no
responsibility for the correctness of the measured values.
1
2
3
4
5
6
7
Mobile
Air quality Monitor
Model #
HI-150
VOC
0.000-10.000 ppm
Co²
400-10.000 ppm
VOC
0.000-10.000 ppm
PM2.5 & Pm10
0-500µg/m³
Battery
Lithium -Polymeer
Charging via
micro USB 5V
Operating Temperature
Storage Temperature
-20°C- 60°C
Dimentions
91 x 41 x 37 mm
Nett weight
60 gr
Certificates
CE,FCC, KC
Product
0°C - 40°C
www.pinewoodelectronics.com
3
info@ pinewoodelectronics.com
Imported in
Belgium by :
Ekorika bvba
Kouterdreef 45
2800 Mechelen
[email protected]
+32 (0)15 68.41.80
Marketing & Sales in Belgium
Pinewood Electronics Marketing N.V.
Prins Boudewijnlaan, 156
2610 Antwerpen
Tel : +32 (0)3 281.25.81
