HULTDINS SuperSaw 551, Руководство по установке

Страница: 31 / 32

M A I N T E N A N C E I N S T R U C T I O N S
En011107a_ss550.FM SuperSaw 31
Lubrication
The saw unit should be lubricated every 8 to 200 hours of
operation depending on the conditions that the unit is
working under. The unit has 2 lubrication points as shown
here.
See ill. 21.
Note! Use a mineral oil based grease thickened with,
or mixable with a lithium soap. The grease should be
classified as L-XCCIB2 according to ISO 6743-9.
Molybdendisulfid content max 3 %. Base fluid
viscosity 170 to 220 cSt at 40°C. NLGI class 1-2.
The first month of operation
Fasteners
Tightening of the all fastners should be made once a week
during the first month of operation.
ill. 21 Lubrication points
1. Housing, 1 pcs.
2. Bearing, 1 pcs.
1
2