HULTDINS SuperSaw 551, Руководство по установке

Страница: 19 / 32

I N S TA L L A T I O N
en011106a_0720335.fm SuperSaw 19
Installation
Installing rotator bracket
1. Assemble the manifold (1) to the rotator (2). Tighten
the collar screws (3) with the correct torque
according to the following chart.
Note! On manifolds whith collar screws (3) with size
G3/4”, The plugs (4) should be tightened with a
torque of 420 Nm.
Torque
Size Torque
G1/2” 100 Nm
G3/4” 170 Nm
2. Assemble the spacer (1) to the rotator (2).
Torque 266 Nm, M16, 6 pcs.
3. Assemble the rotator asm. and the rotator bracket to
the grapple.
Torque 266 Nm, M16, 10 pcs (6 pcs).
ill. 9 Assemble the manifold to the rotator
2
1
3 4
ill. 10 Assemble the spacer to the rotator
2
1
ill. 11 Assemble the rotator asm. and the rotator bracket to the
grapple