background image

1

 

Breathable Air Warning 

DISCLAIMER OF WARRANTIES

DANGER!

CALIFORNIA PROPOSITION 65

This  product  or  its  power  cord  may  contain  chemicals  known  to  the  state  of 
California to cause cancer and birth defects or other reproductive harm. Wash 
hands after handling.

WARNING!

In the event the compressor is used for the purpose of breathing air application and proper in-line safety
and alarm equipment is not simultaneously used, existing warranties are void,and Hulk air force technology 
& AIRBASE Industries, LLC disclaims any liability whatsoever for any loss, personal injury or damage.

READ INSTRUCTION MANUAL BEFORE
OPERATING

RISK OF FIRE OR EXPLOSION

–DO NOT SPRAY

COMBUSTIBLE/FLAMMABLE LIQUID IN A 

CONFINED AREA. SPRAY AREA MUST BE WELL

VENTILATED. DO NOT SMOKE WHILE SPRAYING

OR SPRAY WHERE SPARK OR FLAME IS PRESENT.

ARCING PARTS – KEEP COMPRESSOR AT LEAST

20 FEET AWAY FROM SPRAYING AREA AND ALL

EXPLOSIVE VAPORS.

RISK OF INJURY

– DO NOT DIRECT AIR STREAM

AT BODY. USE EYE PROTECTION. COMPRESSOR

STARTS AUTOMATICALLY. MOVING PARTS. DO

NOT TOUCH. KEEP GUARDS IN PLACE.

COMPRESSOR DOES NOT SUPPLY

BREATHABLE AIR.

RISK OF BURSTING

– DO NOT ADJUST

REGULATOR TO RESULT IN OUTPUT PRESSURE

GREATER THAN MARKED MAXIMUM PRESSURE

OF ATTACHMENT. IF A REGULATOR HAS NOT

BEEN INSTALLED.

USE ONLY ATTACHMENT RATED AT 200 PSI 
ORHIGHER. DO NOT WELD ON OR REPAIR 
TANK – REPLACE. DO NOT OPERATE WITHOUT 
PROPER ASME SAFETY VALVE IN PLACE. 

RISK OF ELECTRICAL SHOCK

 – HAZARDOUS 

VOLTAGE: DISCONNECT FROM POWER SOURCE 
BEFORE SERVICING. COMPRESSOR MUST BE 
GROUNDED. DO NOT USE GROUNDING 
ADAPTORS. DO NOT EXPOSE TO RAIN. 
STORE INDOORS. 

IF CONNECTED TO A CIRCUIT PROTECTED BY

FUSES, USE TIME-DELAY FUSE MARKED “D” 

COMPLIES WITH CCR462 (L)(2).

DO NOT USE BELOW GARAGE FLOOR OR 
GRADE LEVEL 

DRAIN TANK EVERYDAY TO PREVENT 
CORROSIONAND POSSIBLE INJURY DUE TO 
TANK DAMAGE 

This compressor/pump is NOT equipped and should NOT be used “as is” to supply breathing quality air. For

any application of air for human consumption, you must fit the air compressor/pump with suitable in-line 

safety and alarm equipment. This additional equipment is necessary to properly filter and purify the air to

meet minimal specifications for Grade D breathing as described in Compressed Gas Association Commodity

Specification G 7.1 – 1966, OSHA 29 CFR 1910. 134, and/or Canadian Standards Associations (CSA).

Содержание HP02P005S1












Отзывы: