Huka Copilot 24, Руководство пользователя

Страница: 21 / 24

5. MAINTENANCE
5.1 Cleaning
The metal parts, the plastic parts and the soft parts, like saddle, can be best cleaned with
a soft, moisten cloth.
Here you can use soap. Use never aggressive or scratching cleaning agents.
The different mechanisms should regularly controlled on impurities such as grain of sand
etc. and when necessary be clean-brushed.
Cleaning regularly aids the preservation of your tandem.
Never use a high-pressure sprayer for cleaning your cycle. This is because the
pressure of the water is so forceful that you will spray the grease from the
bearings.
It is advisable to regularly lubricate or to grease all moving parts or to have this done by
somebody.
5.2 Control

Derailleur and chain have to be regularly lubricated with oil.

Check regularly if tires are stuck.

Check brakes on activity.

A bicycle shop must check regularly the spoke tension - the first time after approx. 300 km
.
5.3 Tires
Tire size and maximum tire pressure are written on the tire wall.
We recommend to use the maximum tire pressure written on the tire wall. Check the tire
pressure at the fuel station.
In case of emergency, use the inflator attached to the frame. The tires are available at a
local bicycle dealer.
In case of pressure loss, the inner tube of the front wheels can be changed without removing
the whole wheel.
The tire walls are fitted with reflector strips.
5.3.1 Tire pressure
The tires have car valves. You can check the tire pressure (3.5 bar max) at every petrol
station. In case of emergency use the pump attached to the frame.
14