Huka Copilot 24, Руководство пользователя

Страница: 15 / 24

3.5 The position of the handle bar
Adjustment in height and tilt angle is by means of Allen screws (size 5) on the handlebar
assemblies (6a and 6b).
Handlebar grips should be readily accessible for both the "copilot" and the "captain", Make
sure that your knees – even in narrow turns – do not touch the handlebar.
Both handlebars are to be positioned straight ahead. Hold or wedge the front wheel firmly
and align the handlebar with the screws slackened.
Tighten all screws!
3.5.1 Adjust handle bar
The position of the handle bar depends on the body size and the eventually existing
handicap. The handle bar grips should have the same height as the drivers hip. To enhance
the horizontal stability, the handle bar grips should be mounted as forward as possible
without losing comfort by an unfavorable seating position.
The handle bar can be adjusted after loosening the adjustment screw (2) under the handle
bar assembly (black). An allen bolt tool (size 6) is included in the tool set.
Don’t forget to tighten the screw after adjusting.
3.6 The wheels
The wheel is the most important component of the cycle, which is responsible for a light ride
and a high cycle comfort. Many matters are important thereby, like well-inflated tyres, tightly
tensioned spokes and a light running with absence
of play.
3.6.1 Pressure and valve
The correct tyre pressure is obtained for most tyres when you can still push the tyre in a little
bit. When your tyres are too soft they will wear down faster. You will ride much more
comfortable on quite hard tyres and your tandem listens better to the brake and movements
of the handlebars. The inner tubes of the tandem are equipped with a common bicycle valve.
8
Before riding the T-Bike, be sure that
all adjustments are correct.
Please make sure that all screws are
tightened. Please notice that the
handle bar and the saddle must no be
removed after fixing.