Inspiroy Dial 2
Connection
You can connect Inspiroy Dial 2 to a computer or an Android device via a USB-C cable or
Bluetooth.
You can also check the tablet status by watching the indicator light on the left of Inspiroy Dial
2.
Indicator Light
There is an indicator light on the pen tablet to help you check the status of the pen tablet and
the digital pen.
Blue light: Bluetooth connection
A blinking blue light
The pen tablet is in pairing mode.
A steady blue light
The pen tablet is connected to the other device via Bluetooth successfully.
Red/green light: battery
A blinking red light
Low battery
A steady red light
The pen tablet is charging.
A steady green light
The pen tablet is fully charged.
Indicator goes out
The battery is dead or the pen tablet is turned off.
White light: signal input
A white light (dim)
The pen tablet is on while no pen signal is detected; neither a press key nor a function-
switch button is pressed; no dial controller is rotated.
A white light (bright)
The pen tablet is on and pen signal is detected or any of the press key/function-switch
button is pressed; or, a dial controller is rotated.
A pulsing white light
The pen tablet is in sleeping mode.
Wired Connection
4 / 33
