Hugyfot Vision Xs HDMI Monitor, Руководство пользователя, Страница: 7 / 20

Hugyfot User Manual Vision XS HDMI Monitor 5
2 Tips
• Your Hugyfot Vision Xs housing is
developed and machined with great
precision. Treat it with care. Avoid
dropping or exposing to impacts.
• The inside of your Hugyfot Vision Xs
housing is not waterproof and must
be kept dry at all times. Avoid water
droplets from entering your housing.
In the event salt water enters your
housing, pad it dry immediately using an
absorbent towel. Use a damp cloth to
remove any salt crystals.
• Ambient humidity and temperature
differentials may cause condensation
inside your Hugyfot Vision Xs housing,
particularly when moving it from
cold to warm environments. Avoid
condensation by keeping your housing
in a sealed bag or an airtight case.
Allow your housing to acclimate, then
remove it from the bag or case. To
reduce risk of condensation, do not
open your housing between dives.
• If condensation forms inside your
Hugyfot Vision Xs housing, do not
use it. Open your housing, remove
the camera, battery packs and allow
condensation to completely evaporate
before using it.
• Following any extended period of
storage, check that your Hugyfot Vision
Xs housing is operating properly before
diving.
• Thoroughly rinse your Hugyfot Vision
Xs housing in fresh water after each
dive. Repeatedly push all buttons
and levers while submerged to purge
trapped water and flush internal spring
mechanisms.
• Your Hugyfot Vision Xs housing has two
(2) O-rings. Carefully inspect, service
and lubricate each O-ring before diving.
• Hugyfot recommends having your
Vision Xs housing serviced every 2
years, at a minimum, by an authorized
Hugyfot dealer.