Hugyfot Vision Xs HDMI Monitor Скачать руководство пользователя страница 6

Hugyfot User Manual Vision XS HDMI Monitor

4

1 Safety precautions

To prevent personal injury and/or damage 

to equipment, read this user manual 
carefully as well as the supplied monitor 

owner’s manual.

To prevent personal injury

•  Only use battery packs specified in this 

User Manual and follow manufacturer’s 
instructions.

•  Remove leaking battery packs 

immediately from your Hugyfot Vision 
Xs. Leaking occurrences are extremely 
rare. Handling a defective battery 
pack must be done with care, avoiding 
exposure to bare skin, inhaling gas 
emissions or contact with fluids that 
could leak from a defective battery  
pack.

•  Keep battery packs away from children.
•  Dive within your level of training, 

maintain awareness of your depth, tank 
pressure and decompression limits at 
all times.

•  Your Hugyfot Vision Xs underwater 

housing is designed to withstand 

depths of up to 490 feet (150 meters), 

well beyond recreational dive limits, 
as well as most technical dive depths. 

Stay within safety dive limits in keeping 
with your level of certification and 

expertise. Do not use your Hugyfot 
Vision Xs housing at depths beyond 
your training level and skills.

To prevent equipment damage

•  Never leave your Hugyfot Vision Xs 

housing in direct sunlight as heat 
buildup may exceed recommended 
temperature ranges, causing 
permanent damage to electronic 
components, including your camera.

•  Your Hugyfot Vision Xs housing is 

designed to operate between 32°F and 
86°F (0°C and 30°C).

•  Do not use paint thinners, benzene nor 

harsh solvents to clean your Hugyfot 
Vision Xs housing, as these products 
will damage the finish of your housing, 
can cause fire and are harmful to your 
health.

Содержание Vision Xs HDMI Monitor





















Отзывы: