Hugyfot
User Manual
Vision Hero 5
9
7. Installing the battery packs
Your Hugyfot Vision Hero 5 housing is powered by 2 battery packs. One powers
the HDMI 7” monitor and one powers your GoPro Hero 5 Black. Fully charge
battery packs prior to use.
Battery packs are equipped with a 2.1A outlet
(1)
and a 1A outlet
(2)
. Al-
ways use the 2.1A outlet to power the HDMI 7” monitor and the GoPro Hero
5 Black. “On/Off” switch
(3)
. Use input port
(4)
to charge battery pack (See
step No. 10 - Table of Contents).
Prior to installing the battery packs, open your Hugyfot Vision Hero 5 hou-
sing and verify that cable connectors are accessible: GoPro Hero 5 Black
USB-C power
(A)
; GoPro Hero 5 Black HDMI port
(B)
; USB battery pack to
monitor
*
(C)
; USB battery pack to GoPro Hero 5 Black
*
(D)
.
*
Use 2.1A outlet
Step 1: installing the monitor battery pack
- Place a battery pack in the tray, confirm “On/Off” switch aligns with top
red push button
(1)
;
- Tilt battery pack toward you, connect USB battery pack to monitor*
(C)
using the 2.1A outlet
(2)
;
- Seat the battery pack allowing it to lay flat against the tray. It should
click into place
(3)
;
- The battery pack is now securely installed
(4)
.
1
2
3
A
1
3
2
4
B
4
C
D
power switch
2.1A