Hugyfot Vision Hero 5, Руководство пользователя, Страница: 8 / 18

Hugyfot
User Manual Vision Hero 5
8
6. Opening and closing the housing
Your Hugyfot Vision Hero 5 housing is equipped with a rotary secure lock
mecha nism. Open or Close your housing by turning both rotary secure locks at
the same time.
Opening the housing:
­ Place your Hugyfot Vision Hero 5 housing on a flat stable surface, with the
monitor face down. Ensure the monitor sun hood is installed prior to ope­
ning your housing (See step No. 5 ­ Table of Contents).
­ Turn both Rotary secure locks at the same time until notches are facing up
(see picture below).
Closing the housing:
­ Place your Hugyfot Vision Hero 5 housing on a flat stable surface, with the
monitor face down.
­ Your Hugyfot Vision Hero 5 housing has two (2) O­rings. Carefully inspect,
service and lubricate each O­ring before diving.
open
open
­ Once retaining pins are visible through the Rotary secure lock notches, the
front cover of your Hugyfot Vision Hero 5 housing can be lifted. Your hou­
sing is now open.
­ Turn both Rotary secure locks at the same time until notches are facing up
(see picture below).
close
close
­ Place the front cover of your Hugyfot Vision Hero 5 housing over the back
part where the Rotary secure locks are located. Align cover retaining pins
with corresponding Rotary secure lock notch and confirm cover sits pro­
perly in place, then proceed to turn both Rotary secure locks at the same
time until retaining pins are securely locked. Your housing is now closed.