HUGONG POWERTIG 300DPIII, Руководство пользователя

Страница: 10 / 24

10
1.6.4. Parameters save and load (only available under TIG mode)
1. Parameters saving:
> To active the functions of Storage and adjustment, you
should press the S/C button last for 2 or 3 seconds, and then
the numerical digital of channel become to twinkling.
> Click S/C button to choose storage function, at the same
time SAVE indicator lights up.
> Choose storage channel by press CH button, 0-9 channels
are available.
> pressing S/C button last for 2 or 3 seconds to confirm
saving, channel digital tube and indicator snub out at the same
time ( if do not press S/C button to confirm, 4seconds later the
operation automatic be canceled, digital tube and indicator
snub out at the same time).
2. Parameters loading:
> pressing S/C button last for 2 or 3 seconds, to active
loading and adjustment functions, channel digital tube twinkle.
> Click S/C button to choose loading function, at the same time LOAD indicator light up and parameters
of corresponding channels can be watched on panel. And you can lookup every parameter by button
Parameter Selection.
> Choose usable channel by press button CH, 0-9 channels can be chosen.
> Pressing button S/C last for 2 or 3 seconds to confirm loading, and the digital become to keeping light
up, and the parameter loading is success. (if do not press S/C button to confirm, 4seconds later the
operation automatic be canceled, digital tube and indicator snub out at the same time.)