Hugo Brennenstuhl PMA DE V2, Инструкции по эксплуатации и безопасности

Страница: 13 / 126

13 GB
Operation / Cleaning and maintenance
q
Switch the Power Manager
on / off
i
Set the master ON / OFF switch
1
to position
I to switch the Power Manager on.
i
Set the master ON / OFF switch
1
to position
0 to switch the Power Manager off.
Note:
If the Power Manager is switched off,
all connected appliances are also switched off
automatically.
q
Switch electric appliances
on / off
i
Make sure that the Power Manager is switched
on (see “Switch the Power Manager on / off “).
i
Set the respective ON / OFF switch
3
to position
I to switch the connected appliance on. The
respective ON / OFF switch
3
lights up if the
connected appliance is on.
Note:
Socket and respective ON / OFF switch
3
are arranged in the same order.
i
Set the respective ON / OFF switch
3
to posi-
tion 0 to switch the connected appliance off.
q
Use of the USB hub
(only for PMA USB DE V2)
i
First connect the type-B USB jack (square) of
the USB line (included) with the connection
socket
6
.
i
Connect the other end of the USB line with the
USB port of your computer.
i
Now connect the type-A USB jack (flat) of the
respective appliance with one of the 4 USB
ports
4
. Now you can use the Power Manager
as USB hub for your computer.
q
Power adaptor for USB hub
(only for PMA USB DE V2)
It is possible to externally supply the USB hub with
electricity using a power adaptor (not included).
This may be necessary for the use of specific USB
devices.
i
Plug the connection of the power adaptor
(5 V / 2.5 A DC
) (not included) into
the power adaptor socket
5
.
i
Plug the power plug of the adaptor into a
properly installed outlet.
i
Disconnect the adaptor from the adaptor socket
5
when the adaptor is not connected to the
mains.
q
Surge protection
The Power Manager has an integrated surge pro-
tection (19.500 A), which protects the connected
electric appliances from voltage peaks (e.g. indirect
lightning).
- The surge protection is active when the LED
2
is on.
- The surge protection has been destroyed, if the
LED
2
remains dark when the Power Manager
is switched on. The power supply to the sockets
7
is cut.
q
User information
- You can use the body of the Power Manager
as support for various appliances (e.g. notebook,
TFT display etc.) (see figure C).
Q
Cleaning and maintenance
ELECTROCUTION HAZARD!
Keep the device away from rain and moisture. Ingress
of moisture increases the risk of electric shock.
PowerManager_Content_072016_EU.indd 13 18.07.16 16:00