19
oPeRaTInG InsTRUCTIons
To set the Date and Time:
Crown positions:
Position 1 - Normal position
Crown pushed against case
Position 2 - To set DATE*:
Rotate crown counterclockwise
Position 3 - To set TIME:
Rotate crown in either direction
*NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date
may not change on the following day
To operate the Chronograph:
The chronograph function on this model can be used to time an
event up to 12 hours in duration to the nearest 05 seconds Use
Buttons
a
and
b
to operate the stopwatch timer
IMPORTANT: Crown must be in position 1, and chronograph
hands must be at 60 (zero) before stopwatch is started Do not use
chronograph while crown is pulled to position 2 or 3 If necessary,
press button
b
to reset chrono hands to zero before you start
timing
simple chronograph functions:
To measure the duration of a single, non-stop event:
1 Press button
a
to start chronograph
2 Press button
a
a second time to stop chronograph
3 Press button
b
to reset chronograph to zero
analog Chronographs 1/20 of a second
split-time functions:
To take intermediate time readings as a race progresses:
1 Press button
a
to start chronograph
2 Press button
b
to momentarily stop chronograph
3 Read off the intermediate time
4 Press button
b
to resume chronograph function Hands will fly
back, catching up with ongoing event
5 To read a second split time, press button
b
again
Repeat steps 2 through 4 to take any additional split times
6 Press button
a
to stop chronograph
7 Take a reading of the final time
8 Press button
b
to reset chronograph to zero
NOTE: 1/20th Second chrono hand will stop running at 10 minutes,
while the inside mechanism continues to calculate
To synchronize Chronograph Hands:
After a battery change or in the event of an error, you may need
to manually adjust the chrono 1/20th of a second, second, minute
and hour hands to align them correctly at their zero positions
NOTE: It is important to follow steps in this sequence:
1 Pull crown out to position 3
2 Press and hold button
b
for 2 seconds and release
3 Turn crown to move chrono 1/20th of a second hand to its zero
position
4 Again press and hold button
b
for 2 seconds and release
5 Turn crown to move chrono seconds hand to its zero position
6 Press and hold button
b
a third time for 2 seconds and release
7 Turn crown to move chrono minute and hour hands to their zero
positions
8 If necessary, press and hold button
b
for 2 seconds and release
to return mechanism to 1/20th of a second hand adjustment
9 When finished with chrono hand adjustment, push crown back in
to position 1
Minute hand
Start/stop
Crown
Split/reset
Date display
24-Hour hand
Chronograph
seconds hand
Small
seconds hand
Hour hand
1/20 second
chronograph hand
Содержание watches
Страница 1: ...WATCH CARE AND MAINTENANCE OPERATING INSTRUCTIONS WARRANTY AND SERVICE GUIDE ...
Страница 26: ...23 oPeRaTInG InsTRUCTIons Convertible bracelet strap Models 2 1 3 4 Converting Bracelet to Strap 24 ...
Страница 29: ...WATCH CARE AND MAINTENANCE OPERATING INSTRUCTIONS WARRANTY AND SERVICE GUIDE ...
