Figure 41: Network connections – Windows Vista
Note:
If a red X appears next to the Local Area Connection icon, check your connections. You cannot
successfully configure your system if the red X is present.
2.
Right-click the icon that represents the satellite modem network connection, and select
Properties
.
The Local Area Connection-NIC Card Properties dialog appears as shown in
Figure 42: Local Area Connection
Properties – Windows Vista
on page 48.
Note:
Depending on your security settings, a pop-up User Account Control message may appear, requesting
that you confirm the action before proceeding. If you see this message, click
Continue
to proceed.
Figure 42: Local Area Connection Properties – Windows Vista
3.
Ensure that both Client for Microsoft Networks and Internet Protocol (TCP/IP) are installed and checked as shown.
4.
If NetBEUI is installed and checked, uncheck it or uninstall it.
5.
Highlight the appropriate TCP/IP connection. Be careful not to uncheck the checkbox.
6.
Click
Properties
.
48
Computer settings
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. A
Chapter 6
