Hughes HN7000S, Руководство пользователя

Страница: 79 / 126

Appendix A • Typical Operating System Settings
1037073-0001 Revision E
65
Appendix A
Typical Operating System Settings
This appendix explains how to configure Windows and
Macintosh operating system settings so that your computer can
communicate with the terminal.
The following topics are discussed:
•
Determining if DHCP is enabled on the remote terminal on
page 65
•
Configuring Windows for a static IP address
on page 66
•
Configuring Windows to support a DHCP-enabled terminal
on page 80
•
Configuring a Macintosh for a static IP address
on page 90
•
Configuring a Macintosh to support a DHCP-enabled
terminal
on page 92
Determining if DHCP is
enabled on the remote
terminal
You must complete these steps to determine if DHCP is enabled
on the remote terminal before configuring the operating system
settings on the computer connected to the terminal:
1. Open a Web browser on your computer.
2. Type
www.systemcontrolcenter.com
or
192.168.0.1
in the browser’s address bar and press
E
NTER
.
3. Click
System Info
on the System Control Center home page.
4. Observe the value in the DHCP field.
•
If
Disabled
appears in the field, you must manually
configure the computer’s operating system to support a static
IP address. This means the computer’s IP address does not
change, even if the computer is restarted. For a Windows
operating system, refer to
Configuring Windows for a static
IP address on page 66. For Macintosh operating systems,
refer to
Configuring a Macintosh for a static IP address
on
page 90.
•
If
Enabled
appears in the field, you must configure the
computer’s operating system to support DHCP. For a
Windows operating system, refer to
Configuring Windows to
support a DHCP-enabled terminal on page 80. For a