background image

THE ON-SCREEN GUIDES

P

AGE 

6-7

To navigate the guide, use the  ,  ,  , and   keys. You can continue to press the   or   keys to scroll
more program offerings onto the screen.

Pressing 

 on any title will direct you to the 

INFORMATION 

screen. Use 

 and 

 to scroll

through the guide entries a full page at a time.

The WATCHWORD

TM

 Guide

The 

WATCHWORD

 guide is only available on the HIRD-E2 digital satellite receiver.

The 

WATCHWORD

 guide lists programs matching one of the

eight words you have specified on the 

WATCHWORD

 screen

(accessed from the 

SETUP MENU)

.

Note: For the WatchWord Guide to have the opportunity to find
programs with matching words, your digital satellite receiver must
be turned off for a period of time. It is recommended that you allow
your system to look for your words while you sleep or when you are
at work. It cannot search for words while it is turned on.

The 

WATCHWORD

 guide displays up to 8 program titles that can

be seen at once. To navigate the guide, use the   or   keys. You can
continue to press the   or   keys to scroll more program offerings
onto the screen.

The first column displays the program titles. The second column indicates the start time of the
program. The third column indicates the channel that the program is or will be airing on. The fourth
and final column indicates the keyword that was found in the program title

Pressing 

 on any title will direct you to the 

INFORMATION 

screen.

To speed up the process of reviewing the guide, you can use 

 or 

 to page through the guide

entries a full page at a time.

Filtering the Guides

Searching through hundreds of programs can be overwhelming. The digital satellite receiver will help
you find what you are looking for. By pressing the 

 key while already in a guide, a pop-up menu

will display, providing the filtering tools and ways to access other guide styles.

By combining each of these filter options, you can quickly narrow down 200+ channels to those that
meet your viewing interests. Once you exit to view your program, all filters except for the favorite list
will reset to an unfiltered condition.

You should also be aware that some guide styles do not provide access to certain filter options. The
unavailable filters will not appear in the Guide Menu.

Theme Filters

When the 

Theme Filters

 button is highlighted and 

 is pressed, a pop-up menu appears. This

menu offers all the available category groupings of programs. After
choosing a category (other than 

All)

, the drop-down menu is

replaced by another menu called Types.

The WATCHWORD Guide

The Category pop-up menu

Содержание DirecTV HIRD-E11



















































































Отзывы: