Hughes AN8-098R, Руководство по установке

Страница: 38 / 62

Chapter 3 • Installing the antenna and radio assembly
24
1037752-0001 Revision A
Installing the
radio assembly
To mount the radio assembly to the tailpiece:
1. Position the radio assembly above the tailpiece so that the
waveguide end of the radio is nearest to the reflector, as
shown in Figure 17.
2. Insert two 5/16-inch
×
½-inch self-tapping bolts, with flat
washers and lock washers, up through the tailpiece from
underneath, and into the threaded sockets on the bottom of
the radio transmitter, as shown in Figure 18.
3. Tighten the two bolts with a wrench until secure.
Figure 17: Positioning the radio