Hughes AN8-098R, Руководство по установке, Страница: 37 / 62

Chapter 3 • Installing the antenna and radio assembly
1037752-0001 Revision A
23
2. Hold the reflector against the reflector bracket and lower it
onto the bracket, allowing the bolt to slide down into the
alignment fork at the top of the antenna bracket, as shown in
Figure 16.
3. Insert the remaining four carriage bolts into the holes in the
reflector and through the corresponding holes in the bracket
as shown in the figure.
4. Secure the bolts at the back of the reflector bracket, using
four 5/16-inch flange nuts.
Figure 16: Attaching the antenna reflector (rear view)
Note: Ensure that the carriage bolts are firmly seated into
the square holes in the reflector before tightening the nuts.