32
Installing the antenna and radio assembly
1037749-0001 Revision F
5.
Insert one 5/16 inch × 1¾ inch bolt, with flat washer and lock washer up
through the feed support arm and long adapter bracket, and into the
threaded socket on the front of the transmitter.
6.
Tighten only enough to hold the radio in place.
Tighten the nut only enough to secure the radio and adapter bracket to the feed
support arm. Excessive tightening of this nut can crack or crush the adapter bracket.
7.
Place the short adapter bracket in position near the end of the feed support
arm and lower the radio onto it as shown in Figure 15.
Figure 15: Securing the rear of the radio assembly
8.
Insert one 5/16 inch × 1¾ inch bolt, with flat washer and lock washer, up
through the feed support arm and the short adapter bracket, into the
threaded socket at the rear of the transmitter.
9.
Tighten the bolt to secure the adapter bracket and radio to the feed support
arm. Tighten only until snug.
Tighten the nut only enough to secure the radio and adapter bracket to the feed
support arm. Excessive tightening of this nut can crack or crush the adapter bracket.
