2
For safety purposes, the BassBase 600's power amp is exclusively equipped with Speakon jacks and female
XLR jacks. (In some cases, you may need to employ an adapter cable.)
NOTE: Under no circumstances should you use 1/4" plugs for connecting speaker cabinets to the BassBase
600; they are not designed to handle the amount of power this amp puts out.
3.0 SELECTING EQ SETTINGS/MIDI
You can activate the BassBase 600's two VARIMETRIC EQs and the FX LOOP in any one of three different
ways: via the front panel controls, the STAGEBOARD, or MIDI (once the MSM 1 MIDI Module has been
installed).
From the front panel, press the EQ ON button to enhance the basic EQ section (BASS and TREBLE), which
is always on, with the VARIMETRIC EQ. Now you can use the EQ A/B button to switch back and forth
between VARIMETRIC A and VARIMETRIC B.
From the Stageboard, use the same procedure to select a setting. The LEDs illuminate to indicate the current
switching status.
