9
era 1 – Manual 1.1
4 Technical Specifications
Inputs
Input CH 1 / CH 2 – Instrument
Jack plug 6,3 mm (1/4")
Tip = (+), Ring = phantom power or gnd,
sleeve = gnd
Input Impedance
2,2 M-ohms, unbalanced
Gain Range
0 – 30 dB
Max. Input Level
+17 dBu
@ line out, 1 kHz, THD+N <1%
S/N Ratio
>92 dB
@ line out, 22 Hz – 22 kHz, input shorted,
Gain = 0 dB, re +4 dBu
>89 dB
@ power amp out, 22 Hz – 22 kHz, input
shorted, Gain = 0 dB, re +36 dBu
EIN
–113 dBu
@ line out, 22 Hz – 22 kHz, input shorted,
Gain = 30 dB
–113 dBu
@ power amp out
Dynamic Range
>105 dB
@ line out, 22 Hz – 22 kHz, input shorted,
Gain = 0 dB
>89 dB
@ power amp out
Phantom Power
+9 Volts
Input CH 1 / CH 2 – Microphone
XLR
Pin 2 = (+)
Input Impedance
1 kOhm, balanced
Gain Range
0 – 46 dB
Max. Input Level
+8 dBu
@ line out, 1 kHz, THD+N <1%
CMRR
> 71 dB
Rs = 200 ohms, 100 Hz, Gain = 46 dB,
re +4 dBu
S/N Ratio
>92 dBu
@ line out, 22 Hz – 22 kHz, input open,
Gain = 0 dB, re +4 dBu
EIN
–121 dBu
@ line out, 22 Hz – 22 kHz, input open,
Gain = 46 dB
Dynamic Range
> 100 dB
@ line out, 22 Hz – 22 kHz, input open,
Gain = 0 dB
Phantom Power
+24 Volt
Input CH 3
Mini jack 3,5 mm stereo
Tip=left channel, Ring=right channel
FX Loop / CH 4 – Input
Jack plug 6,3 mm (1/4") stereo
Tip=left channel, Ring=right channel
Max Input Level: +10 dBu
Outputs
FX Send
Jack plug 6,3 mm (1/4") stereo
Tip = CH 1, Ring = CH 2
Max Output Level: +10 dBu
Line Out
Jack plug 6,3 mm (1/4") stereo
Max Output Level: +10 dBu, unbalanced,
2 kOhm Load, THD+N <1%
Optical Out
S/PDIF Toslink, 24 bit/48 kHz
DI Out
XLR
PIN 2=(+), Max Output Level: –10 dBu,
unbalanced,, 2 kOhm Load, THD+N <1%
Footswitch
Jack plug 6,3 mm (1/4") stereo
Tip = CH 1/2 mute, Ring = internal fx mute
Tuner
Jack plug 6,3 mm (1/4") mono
Phones Out
Jack plug 6,3 mm (1/4") stereo
Tip=left channel, Ring=right channel
Equalizer
Bass
+/–10 dB peak EQ
@ 80 Hz (Mode 2: @ 110 Hz)
Mid
+/–6 dB peak EQ
@ 700 Hz (Mode 2: @ 1200 Hz)
Treble
+/–10 dB peak EQ
@ 10 kHz (Mode 2: @ 12 kHz)
General
Mains voltage tolerance range
+/–10%
Ambient operating temperature
range
0° to +35° C
Current consumption pursuant
to EN 60065*
0,38 A / 220-240 V AC
0,69 A / 100-120 V AC
Power Amplifier
Class D
Output Power
250 W
Output Voltage
70 V peak
Speaker System
1x 8" 1x 1" dome tweeter
2-way passive, closed box design;
70 Hz – 15 kHz (–3 dB)
Size
Dimensions (WxHxD)
351 x 285 x 290 mms
13-13/16 x 11-15/64 x 11-27/64"
Weight (black)
10,75 kg / 23,7 lbs.
Weight (wood)
9,85 kg / 21,7 lbs.
* Current consumption (mains power) was measured at the internal amplifier’s output at
1/8 power by inputting a sine wave as specified in the EN60065 standard. This value represents
the average current drawn from the mains grid when operating the system with standard
music signals.
• English
• Deutsch
• Français
• Italiano
• Español
•
日本
語
Содержание era 1
Страница 50: ...50 era 1 Manual 1 1 ...
Страница 51: ...51 era 1 Manual 1 1 ...
