HUGH CRANE (Cleaning Equipment) Ltd –
COMMANDO
®
5050
Page 8
BEFORE STARTING WORK
a)
Check engine, gearbox and pump oil level and top up if required.
b)
Fill fuel tank with clean diesel fuel.
c)
Ensure unit is standing on level ground.
d)
Connect a mains water supply hose to the inlet valve. Fill with clean water only and
ensure that there is sufficient water in the tanks before starting the engine. Confirm
that the water supply has sufficient capacity to keep the COMMANDO 5050 supplied
continuously (35 litres/min).
e)
Ensure that high-pressure hose is fitted with either a spray gun or a foot control
pedal and that these are in the
OFF
position. Where a drain jet only is fitted ensure
that the 3-way valve is in the
DUMP
position.
Hose reel lock in
ON position.
Diesel filler.
Diesel level.
Water inlet.
Bleed valve
Pulsation valve
3 way valve
Engine speed control
Engine starter panel
Hose reel lock in
OFF position.
