HUGH CRANE (Cleaning Equipment) Ltd –
COMMANDO
®
5050
Page 6
c)
The user’s attention is drawn to health and safety guidance note P.M.29, which deals
with the use of high-pressure cleaners and steam cleaners. Eye protection to
BS2092/2 must be worn when this equipment is used.
d)
All repairs to this equipment must be carried out by suitably qualified personnel only.
No modifications or changes to the specification of this machine should be made
without prior consultation with and approval of the manufacturer.
e)
The machine is supplied with guarding in compliance with current legislation. The
machine must not be operated with any of the guards, covers or any other safety
equipment removed or damaged.
f)
Components that are supplied by others e.g. gearbox and pump, are covered by
individual manufacturer’s information, which is included for your use.
g)
Chemicals may be used in conjunction with this equipment. Only chemicals supplied
or recommended by the manufacturer should be used, as other products may effect
the safe use of the equipment. Consideration should also be given to environmental
and COSHH regulations.
h)
Never attempt to adjust or clean any part of the machine with the tractor engine
running.
Always stop the tractor engine and pull the trigger to relieve residual
pressure before carrying out any adjustments, especially to the high-pressure
pipework or drive shaft etc.
i)
The high-pressure spray gun is provided with safety lock, which enables the trigger to
be locked off to prevent inadvertent use.
