16
Oper
a
tion
Steering the Unit - Forward and Reverse:
Move both Control Grips FORWARD to move FORWARD
Move both Control Grips BACKWARDS to move BACKWARDS
9
Assembly
Installing Drive Wheels:
B
C
C
E
F
D
B
F
A
STEPS:
NOTE: BEFORE STARTING, CUT PLASTIC TIES AT EACH MOTOR.
1. Insert Motor Ends so wires and Motor are inside Body Holes
A
and Axle holes line up.
2. With one end of Axle
C
on ground, insert one Drive Wheel
B
fully onto Axle and push
center Lock Button
D
until Wheel SNAPS into locked position.
3. Slide this Wheel/Axle assembly through one Drive Motor
E
, body and other Drive
Motor making sure Wheel Gears
F
fully seat in Drive Motor Sprockets.
4. Install other Drive Wheel
B
fully onto axle and push center Lock Button
D
until Wheel
SNAPS into locked position.
WARNING
:
Check that wheels are fully snapped in place by gently pulling
outward.
NOTE:
To remove Wheels, press Center Button
D
while pulling Wheel OUTWARDS.
