12
Assembly
Connecting Drive Battery:
STEPS:
NOTE:
Battery is located under Seat.
1. With seat removed, fi rmly attach Red Connecter
A
to Red Battery Terminal as shown.
2. NOTE:
Black Connector
B
is attached by factory.
A
B
13
Assembly
Installing the Fenders:
Installing the Seat:
STEPS:
1. Tilt Seat so that front edge Tab
C
fi ts
under edge of control Cowling.
2. Position Seat in place as shown so that
mounting holes
A
line up.
3. Install 4 Screws
B
evenly and securely. -
Do Not Overtighten.
STEPS - Note - Fenders are marked
(R)
(right) and (L) (left):
1. Position each Fender so that Tabs line up with mounting Slots
A
.
2. Press
fi rmly and evenly until all Tabs snap into place.
A
B
C
A
L
R
