Huepar DT03CG, Руководство пользователя

Страница: 14 / 100

Note:
！
• To restore horizontal or vertical leveling, deactivate the tilt
function.
• The automatic sensor is deactivated under tilt function.
• Under tilt function, the laser beam(s) will blink about every
3-5 seconds to notify the user it is not self-leveling now.
• For the tilt function, laser lines are no longer aligned to the
horizontal or vertical plane. This is a specific feature of adjusted
laser lines.
Under pulse mode, the laser unit can work with Huepar Laser
Receiver (optional) to carry out leveling at great distances or when
the laser lines are no longer visible.
A. Pulse mode under Self-leveling mode:
Tilt Function
Pulse Mode
-13-
• Press and hold the button for ≥3 seconds until the tilt function
LED
（
18
）
flashes rapidly
.
• Position the laser unit at various angles.
• Press and hold the button for ≥3 second until the tilt function
LED (18) lights off, or short press to turn OFF the laser unit and
power ON again. It will return to the self-leveling mode.
• Turn on the laser unit, short press to turn the Pulse Mode
on.
3 sec.
Place the laser unit for use
at any angle.