Hudson Terraplane Special 1935, Руководство пользователя

Страница: 39 / 49

With the car carrying a full passenger load, cover the left headlamp to obscure
its beam and place lighting switch in the high or country driving position. Loosen
the mounting nut of the right lamp and aim the lamp so that the top of the light
beam is just even with the horizontal line and equally divided on each side of the
center line (D) of the right lamp.
Tighten mounting nut on right lamp and follow same procedure in aiming left
lamp to center on line (C). When this has been properly done, the lamps will be
correctly aligned for both the city and country driving positions.
Removal of Headlamp Lens
Loosen the screws at the bottom of the lamp body. Push the bottom of the lens
backward and downward until the top of the lens is clear of the top of the lamp
body and lift out. Replace by reversing this operation.
Do not touch the reflector, as any marks will reduce the illumination. Should it
be necessary to clean the reflectors, use ordinary lampblack on a soft cloth and
wipe gently in a circular motion.
If the reflectors require frequent cleaning, it is an indication that the gaskets
are not giving a proper seal and they should be replaced.
BATTERY
Registration
A 17-plate, 105-ampere hour National battery is used. This battery is covered
by a Guarantee and Adjustment Policy by its manufacturer. To be entitled to the
benefits of this Policy the battery must be registered with a National Battery
Dealer within thirty (30) days after delivery of the car. Do not neglect to make this
registration.
Care
The battery requires little attention; however, this attention is absolutely essen-
tial. Negligence will shorten the battery life and cause premature failur
e
37 TERRAPLANE SPECIAL SIX