Step 2: Attach the seat and seat post
1. First, remove the 3 M8 Nylon Locknuts (34) and 3 M8 Flat Washers (33) from the Seat (32). Attach the Seat (32)
to the Seat Post (4) and tighten with 3 M8 Flat Washers (33) and 3 M8 Nylon Locknuts (34) securely. Please use
the tool 13 x 15mm spanner.
2. Remove the Seat Post Knob (30) by turning it counterclockwise from the Frame (1). Next, insert the Seat Post (4)
into Flexible pipe sleeve (53), then insert the Seat Post (4) into the Frame (1). Align one of the adjustment holes in
the Seat Post (4) with the indicated hole in the Frame (1). Insert the Seat Post Knob (30) into the Frame (1) and the
Seat Post (4), and turn the Seat Post Knob (30) clockwise until it is tight. Make sure that the seat post knob is
inserted into one of the adjustment holes in the seat post. There is a mark “MAX” on the Seat Post. After inserted
the Seat Post and the Seat Post Knob, when you can see the “MAX”, it is farthest deep.
NOTE: Make sure you fasten the bolts securely to avoid shaking and discomfort when cycling.
GB
HUDORA GMBH • Jägerwald 13 • 42897 Remscheid
http://www.hudora.de
Art.-Nr. 65240
Stand 01/09
Seite 13/16
DIN EN 957-1/5, Klasse H.C.
