User Instructions
The GHF10H and GHF50H cameras are made for easy
installation, using only a single RJ45 ethernet cable for
both power and communications with a host computer.
Installation
Use the
¼
” tripod mount found on the bottom face of
the camera to attach a bracket to the GHF10H or
GHF50H.
The GHF10H and GHF50H must be installed in a
location where the top and bottom venting holes are
unobstructed, to ensure proper airflow.
In case of wall-mounting, the GHF10H and GHF50H
should be installed less than 2 meters above floor level.
Connect a Cat5e ethernet cable to the camera, and
terminate the cable in a PoE PSE enabled host or
midspan adapter.
Power
The GHF10H and GHF50H cameras can be powered by
a PoE PSE which adheres to the following minimum
requirements:
●
Voltage range: 37-57V DC
●
Maximum current: 0.35A
HD-PGDE-0120-A0
5
