Streaming
The GHF10H and GHF50H support streaming over the
Real Time Streaming Protocol (RTSP).
Factory reset
To reset the GHF10H or GHF50H to factory default, use
the following procedure:
1. Ensure the camera is powered on
2. Disconnect the ethernet cable from the camera
3. Use a thin object to press the reset button
through the hole located in the top left corner of
the connector cavity
4. Keep the button pressed while reinserting the
ethernet cable
5. After power has been reapplied to the camera,
keep the reset button pressed for 10 seconds
6. The camera will now reset to factory settings
HD-PGDE-0120-A0
6