Hud-son Oscar 330 Pro, Руководство оператора

Страница: 10 / 40

10
7. A tensioned blade should come off the bottom of the band wheel and run straight
across to the other band wheel, so there is NO sag in the blade between the
two wheels.
Tension nut for
larger units
(330/336)
1 3/8” nut size
F Setting Logs
Once the track is set, the head is in place and the blade is tensioned correctly, you are
almost ready to cut.
1. Place the log determined by the mills size, on the center of the track. Using the log
dogs secure the log to the track. Be sure to dog the log high enough
(1/2" way up the log) to ensure the log does not move.
Squaring Arm and Adjustable Dog
G. Getting Ready to Cut
Now is the time to debark or clean your log. This can be achieved by the simple chain-
saw attachment, called a Log Debarker (available through Hud-Son Forest Equipment
Inc.) or you can pressure wash or use whatever method available to remove any mud
or bark from the logs. By debarking and cleaning your log it will extend the life of your
blade.
1. Adjust the Hud-Son guides so that they are slightly (no more than 2 inches) wider
than the maximum width of the log.
Use 2x4 method or wooden wedge for full 36” logs.
If it is unstable to make your first cut.