28 | 32
OWNERS MANUAL | Cobolt 04-01 Series | D0105-I October 2022
Cobolt Monitor
™
software expanded to for more detailed monitoring.
TEC Settings
–
shows the running status and the fault status f
or the laser’s internal thermoelectric coolers (TEC).
Laser Operation Mode and Settings
- displays the set laser power. The user can switch between constant power
mode and constant current mode. Likewise, there are boxes to set the constant power level and constant current
level. The output power (as monitored measured on an internal photodiode) and the current through the laser pump
diode are both displayed.
Autostart Program
- displays whether the laser is in CDRH or OEM mode and displays the current laser operational
status. 5V direct input is set here, see section 4.4
. There are also buttons to “abort” the autostart sequence or to
“restart” the laser after a fault.
NOTICE
Specifications are only guaranteed in constant power mode, at 100% of nominal power.
Fault Status
–
displays ERROR messages. In the event of an ERROR, the laser action is stopped. When the reason for
the ERROR event is understood and the problem is addressed the fault status can be cleared with “Clear Fault”. If the
Autostart Program is enabled, click restart to restart the laser.
LED Status
- displays the LEDs that are currently illuminated on the Controller, see section 3.4. These are displayed
even if the laser is in OEM mode.