Hublot Big Bang Alarm Repeater, Инструкция по эксплуатации

Страница: 5 / 12

5
TIME & ALARM SETTING
INTRODUCTION
This function enables you to set the watch time and alarm time using the crown at 3 o'clock.
OpERATION
2
Lo
ca
l t
im
e
Alarm
On/Off
1
A
la
rm t
im
e
0
W
ind
in
g
1. Turn the crown a quarter-turn anti-clockwise. The
crown is in the 0 position, which enables the watch to
be wound manually. It takes 45 turns of the crown to
fully wind the watch, i.e. for the 72-hour power reserve.
2. pull the crown out to position 1 (Alarm Time), and turn
it preferably clockwise to set the desired alarm time.
3. pull the crown out to position 2 (Local Time), and turn
it preferably clockwise to set the watch time.
Make sure to take into account the Day/Night indicator
at 1 o'clock.
4. push the crown back against the case into position 0
(Winding), and then turn it a quarter-turn clockwise to
screw it back in.
5. press the push-piece at 4 o'clock to activate or
deactivate the alarm (check using the alarm On / Off
indicator).
Hublot_AlarmeRepeater_PROD_EN.indd 5 29.07.15 08:41