![Hubbell GAI-Tronics ICP9000 Series Скачать руководство пользователя страница 39](http://html1.mh-extra.com/html/hubbell/gai-tronics-icp9000-series/gai-tronics-icp9000-series_operators-manual_2180229039.webp)
ICP9000 Navigator Series Console Operator’s Manual
Standard Feature Operation
39
04/15
Initiating the Page
When the desired capcode is entered or alias selected the operator should activate monitor on the channel
to ensure that the radio channel is not in use. When the channel is free, the operator should press the
page
TRANSMIT
button or the main
TRANSMIT
button. The paging tones can be heard through the
select speaker as they are transmitted.
When the paging tones are complete, “TALK NOW” flashes at the upper right of the information
window if talk time has been programmed for the particular type of paging or alias. While “TALK
NOW” is flashing, the microphone is active and voice audio is transmitted over the channel(s) to the
paged units. To extend the talk time, press and hold the main
TRANSMIT,
page TRANSMIT or channel
TRANSMIT button.
Additionally, it is possible to initiate an alert tone during the talk time. To activate an alert while “TALK
NOW” is flashing, simply press the desired alert tone button. Upon releasing the alert tone button, the
console will again flash “TALK NOW” at the upper right of the information window for a minimum of
two seconds. During this time, the microphone is active and voice audio is transmitted over the
channel(s). To extend the talk time, press and hold the main
TRANSMIT,
page TRANSMIT or channel
TRANSMIT button.
When the talk time is over, the operator releases the appropriate transmit button or if no talk time has
been programmed, the console exits paging mode, returns to normal operation, or hot standby paging,
and selects the previously selected channel. As discussed earlier, the operator should exercise caution
when following a page with a voice transmission to ensure that the correct channel is selected.
Sequential Channel Specific Group Paging
A special type of alias preprogrammed with a sequence of other aliases is called a group page. A group
page is configured using CARD Suite and contains of list of alias pages that are sequentially transmitted
on the auto-base station channel, as programmed in each alias. This allows for activation of multiple
sirens or paging of several emergency services at once. As a group page progresses, each alias in the
group is referenced, and the channel and frequency on which it has been preprogrammed to page are
selected.
The alias is displayed on the paging line and the paging tones are heard through the select speaker as the
page is transmitted. Upon completion of all pages, “TALK NOW” flashes at the upper right of the
display if a talk time has been programmed for the group. During this time, the microphone is active and
voice audio is transmitted over the channel(s). To extend the talk time, press and hold the main
TRANSMIT,
page TRANSMIT or channel TRANSMIT button on any transmitting channel.
When the talk time is over, the operator releases the appropriate transmit button or if no talk time has
been programmed, the console exits paging mode, returns to normal operation, or hot standby paging,
and selects the previously selected channel. As discussed earlier, the operator should exercise caution
when following a page with a voice transmission to ensure that the correct channel is selected.