manualshive.com logo in svg

Hubbell GAI-Tronics ICP9000 Series, Руководство оператора

Поделиться
Скачать
Hubbell GAI-Tronics ICP9000 Series Скачать руководство пользователя страница 20

Navigator Configuration 

ICP9000 Navigator Series Console Operator’s Manual

 

04/15 20 

 

Tool Options 

The Tool Options allow the user to configure which buttons are available in the Navigator tool bar for 
each individual operator.  The factory default setting displays all available buttons. 

Channel Selection

 

The Channel Selection section determines which channels are displayed in the main window for each 
individual operator. 

Control 

The Control portion has four different modes of operation that determine what action the display takes 
after a button press. 

1.

 

Display Always On - the operator will be unable to close the Control form. 

2.

 

Push On/Off - using the Control tool options button, the operator has the ability to display the 
Control form and close the form. 

3.

 

Auto Extinguish - the Control form is closed five seconds after a control button is pressed. 

4.

 

Inactivity On/Off - Control form is automatically closed if a control button has not been selected 
within a pre-programmed amount of time set by the timeout. 

Содержание GAI-Tronics ICP9000 Series







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды