Hubbell GAI-TRONICS 293-003 Скачать руководство пользователя страница 12

P

AGE 

11 of 19

S.M.A.R.T. ADA-C

OMPLIANT 

E

MERGENCY 

P

HONES

42004-351H

\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-351h.doc
02/05

Special care must be given to adjusting the speaker volume and microphone level.  If one or both of the
levels are set too high, acoustic feedback (howling) can occur.  If acoustic feedback occurs, we
recommend returning both potentiometers to the nominal factory settings and beginning the adjustment
again from this point.

Additionally, the acoustical characteristics of the emergency phones are different both when the front
panel is removed from the enclosure and when the front panel is tightly mounted in the enclosure.  After
making any volume adjustments, we recommend mounting the front panel to the enclosure and again
testing the phone.

Auxiliary Output

Each telephone includes one isolated solid state switch capable of switching a maximum of 48 V dc, 125
mA or 28 V

RMS

 ac, 80

RMS

 mA.  TB2 (OUT1) on the emergency phone PCBA provides the connections for

the auxiliary output.  Refer to Figure 7 for the location of TB2.

The auxiliary output allows peripheral equipment, such as beacons, video cameras, and alarm generators,
to be activated when the 

EMERGENCY

 push button is pressed.  The relay remains energized for the

duration of the emergency call.

In many applications, the auxiliary output is used to operate a GAI-Tronics Model 530FB/531A Beacon
(sold separately).  For connection details, please refer to the Model 530FB/531A installation bulletin
included with the beacon.  Information is also available at www.gai-tronics.com.

Содержание GAI-TRONICS 293-003






















Отзывы: