Pub. 42004-194H
Model 234 Stanchion Assembly
Page:
3 of 11
d:\standard ioms - current release\42004 instr. manuals\42004-194h.doc
09/05
Installation
ATTENTION
Installation should be performed by qualified personnel and only in
accordance with the National Electrical Code and applicable local codes.
The following information provides guidelines on the installation of various components of the
emergency station. Grounding electrode conductor (not depicted in the illustration) must be constructed
in accordance with the National Electrical Code and applicable local codes.
Model 84504 Hardware Kit Installation
The Model 84504 Hardware Kit includes four anchor bolts, which should be installed so that they extend
3 inches above the top of the pier surface. See Figure 3.
Use the template provided in the hardware kit for anchor bolt positioning, or see Figure 4 for dimensions.
The 3-inch leg of the anchor bolts should point to the center of the tube. Center lines should be measured
across the corners.
Figure 3. Front View
