Hubbell G250P, Руководство по установке и эксплуатации, Страница: 47 / 67

47
No recirculation selected
Thermostatic valve
Dedicated line
Tank loading
Cascading (Daisy Chain)
1.
Mode
Press and hold the
Mode
button.
2. Then use the
Up/Down
arrows to select
the programming mode dC on the display.
3.
Enter
Press the
Enter
button to begin programming.
4.
Set
Press the
Set
button to select either ON or
OFF.
5. Once the water heater is programmed to
ON, use the
Up/Down
arrows to select
the unit number (1 -
10
). Each unit must
have a unique number. The units do not,
however, need to be numbered in
sequence.
6.
Mode
Press and hold the
Mode
button to save the
changes and return to the dH screen on the
main display.
7.
Enter
Press Enter to return to the main display
screen.
WATER HEATER PROGRAMMING SECTION
Pump on continusouly