Occupancy Sensor - Wall Mounted
Installation Guide
Model: WIS-OSW
Package Contents
▪
Occupancy Sensor
▪
2 screws, 2 wall anchors
▪
1 wide angle lens
(installed)
▪
1 long range lens
Product Description
The wall-mounted Occupancy Sensor saves energy and adds
convenience by accurately detecting when an area is occupied
or vacant.
It is wireless, solar-powered, and uses a passive infrared (PIR)
sensor to detect motion. The occupancy sensor transmits RF
signals to control lighting, HVAC and outlets more ef
fi
ciently.
Features Include:
▪
Sends wireless signals to receiving devices when
motion is detected
▪
Harvests indoor light to power the sensor and wireless
communications
▪
Mounts
fl
ush on the wall or in a corner
▪
Works with other sensors for enhanced occupancy tracking
▪
Interchangeable lenses for tailored sensor coverage
▪
Built-in tests to con
fi
rm operation at installed location
▪
Supplemental battery or alternative power supply options for
extreme low-light conditions
▪
Speci
fi
cations
Power Supply Indoor light energy harvesting
Optional: Supplemental battery or
2-wire connector for external power
or remote solar cell (3-5 VDC)
RF Communications EnOcean 902 MHz
RF Transmission Range 80 ft. (25 m)
Motion Sensing Range Up to 100 ft. (25 m)
(refer to coverage diagrams)
Minimum Operating Light 50 lux (for auto-off only)
Startup Charge Times*
(from empty)
Linking only
4 minutes @ 100 lux
1.5 minutes @ 200 lux
Motion Transmission
6 minutes @ 100 lux
3.5 minutes @ 200 lux
Light/Walk Test Modes
5.5 hours @ 200 lux
Time to Full Charge* 9 hours @ 200 lux
Sustaining Charge Time 3 hours per 24 hours @ 200 lux
Motion Transmission
Interval
Variable 60 - 300 seconds
(based on real-time charge rate)
60 sec @ 200 lux - 300 sec @ 50 lux
Heartbeat Transmission
Interval
Variable 120 - 600 seconds
(based on real-time charge rate)
120 sec @ 200 lux - 600 sec @ 50 lux
+ 0-50 sec randomized delay
Operating Life in
Total Darkness
48 hours
(after full charge)
EEP (EnOcean
Equipment Pro
fi
le)
A5-07-02
Dimensions 5.83” L x 2.52” W x 1.8” D
(148 mm x 64 mm x 45.7 mm)
Weight 4.09 oz. (116 g)
Mounting Height 6-8’ (recommended)
Environment Indoor use only
14° to 104°F (-10° to 40°C)
20% to 95% relative humidity
(non-condensing)
Agency Compliance FCC, IC, RoHS
* Sunlight, bright lighting or a battery can be temporarily used
to signi
fi
cantly shorten startup charge times.
Tools Required
▪
Power drill, 3/16” bit
▪
Screwdriver
▪
Leveling tool
▪
Light meter
▪
Battery (CR2032) for testing
Page 1
© 2013 Hubbell Building Automation | www.hubbell-automation.com
64mm
148mm
5.8”
2.5”
Solar Cell
Lens
Button
Interface
45.7mm
1.8”
28mm
1.1”
Hubbell
Building Automation
