14
Click the analysis interface button to enter the analysis interface.
Click the experiment stopped switch in the analysis interface to change the switch
text into experiment started and experiment test started.
After the experiment is started, the instrument controls the whole experiment process
according to the parameters set by the method, and the user monitoring is not
required.
After the experiment, the hot bath fan is turned on, so that the hot bath can quickly
return to the method to set the cooling temperature value.
4.End of experiment
At the end of the experiment, please clean the cup for the next experiment.
Wait for the temperature of the hot bath to fall within the safe temperature range and
turn off the power.
Wipe the flash point detector gently with clean paper or cloth.
V.Fault analysis and troubleshooting
VI.Guarantee, warranty and service
Ignition wire is consumable and is not covered by warranty.
