3
13.Software management function is powerful that takes into full account of site use
demand. Measuring data is automatically saved and exported to form Word version test
report (require installation of relevant Office software) or JPG photo report to facilitate the
user to export test report.
14.The software has distinctive humanized feature. Measuring conditions are mostly
options, which exempt the need of many inputs and bring about easier operation.
15.The software has high degree of intelligence. You only need to click one key to
complete all measurements after connection of input and output signals.
16.The software interface is concise, vivid and practical.
III.Main Technical index
1.Measuring speed: 1 min- 2 min for single-phase winding
2.Output voltage: Vpp-25V, adjusting automatically in test
3.Output impedance: 50Ω
4.Input impedance: 1MΩ (the response channel is built with 50Ω matching resistance)
5.Frequency sweep scope: 10Hz-2MHz
6.Frequency accuracy: 0.001%
7.Frequency sweep manner: linear or logarithmic, frequency sweep interval and number
of sweep points are freely settable
8.Curve display: Mag-freq. curve
9.Measuring dynamic range: -100dB~20dB
10.Power source: AC100-240V
50/60Hz
11.Net weight: 3.6kg
IV.Method of operation
1.Operation Flow of System
Ground collector
Connect collector and transformer winding
Connect collector and computer
Start up computer
Power on collector
Log in software
Input information
Select end-frequency and adjust testing parameter
Select winding
Start testing
Replace test winding
Select winding
Start test
