5
can be preset.
Cycle key:
press this key to scroll the cursor in the main menu
Selection key:
After the unit is reset, press this key to perform current preset.
Start key:
Press this key after the output current is selected, and the microcomputer
control realizes the whole test process.
I+, I-:
output current binding posts, I+ is the output current is positive, I- is the output
current is negative.
V+, V-:
Voltage sampling terminal, V+ is the positive terminal of the voltage line, and V- is
the negative terminal of the voltage line.
RS232:
Universal serial interface, the instrument can be controlled by a computer.
USB:
can output test results to U disk.
VI.Method of operation
1. The boot interface is shown in Figure 1:
Figure 1
Figure 2
Press the cycle key and the cursor can move among the options included in current
selection, phase tapping, winding temperature, conversion temperature, data query, host
