1.2 Interface of the Inverter
LCD display
Normal status indicator
Fault/Warning status indicator
Function buttons
WiFi/GPRS
Parallel communication resistor switch
Battery CAN /RS485
Acid NTC port
Dry contacts
Power on/off switch
Parallel communication ports
EPS on/off switch
Circuit breaker
1.3 Packing List
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged.
You should have received the following items in the package:
Storing the Inverter
The inverter must be stored appropriately if not installed immediately, refer to below figure.
a) The inverter and its components must be stored in its original packaging.
b) The storage temperature should
be within -25~60 and humidity within 0~85%.
c) The packing should be upright and maximum stacked layers is 6 .
d) Do not directly exposed the inverter and its packaging to sunshine, raindrops and keep away
from corrosion.
User Manual X1
Wi-Fi Module X1
Entry-Level Hybrid Solar
Inverter X1
Cross Head
ScrewX5 / NutX2
Expansion Screw
and Tube X4
PVA+ PVA- PVB+ PVB-
L
N
PE
AC INPUT
L
N
PE
AC OUTPUT
L
N
GEN
BAT+
BAT-
MPPT485
Li-ion
CAN/RS485
WIFI
NTC
OFF
ON
EPS Output
Parallel
BAT+
BAT-
PVA
PVB
AC OUTPUT
AC INPUT
GEN
Dry Port
GEN
No2 COM2 Nc2 No1 COM1 Nc1
OFF
ON
Power
03
04
CAUTION !