Installing the Interface Card
4
Only the SVN5530/5530-C3/5560 supports the encryption car
with the encryption card.
2
Before installing the interface card, wear ESD gloves and
strip into the ESD jack of the device or cabinet.
1
with the encryption card.
2
Loosen the captive screws on the filler panel in
th
l t f
i t f
d
d
th fill
the slot for interface card and remove the filler
panel.
4
4
Push the lever inward until it touches the panel at the
interface card side. Fasten the captive screws.
C
ti
th C
l C bl
Connecting the Console Cable
z
Before connecting the console cable, select a configuration te
RS-232 serial port or a common PC. The following uses a comm
z
Before connecting the console cable, power off the configura
7
Connect the RJ45 connector of the console cable to the cons
connector to the serial port on the PC.
rd, whereas the SVN5530-C1 and SVN2230/2260 do not come
d ESD wrist strap. Insert the grounding end of the ESD wrist
3
3
Pull the ejector lever on the front panel of the interface
j
p
card to the vertical direction with the chassis panel.
Push the interface card along the guide rail of the slot
until the ejector lever touches the chassis.
erminal. It can be either a standard character terminal with the
mon PC.
ation terminal.
7
sole port on the interface card side of the device, and DB9
